User's Manual

Chapter 9 - Operating the H200 Wireless System

Pausing/Resuming Stimulation

Functional Training and Motor Neuromodulation Programs may be programmed

to run from 5 minutes to 120 minutes, as determined by your clinician. Personal

Custom Programs may be programmed to run from 30 to 240 minutes, as

determined by your clinician. Once started, these programs will continue until

they are ﬁnished. However, they may be paused and resumed at any time.

To pause/resume stimulation:

Press the

trigger button on the Control Unit or the trigger button on the

Orthosis. When the program is paused:

• The Control Unit

trigger button will be SOLID YELLOW.

• The Orthosis

stimulation light will be SOLID YELLOW.

Note: Neuroprosthesis programs cannot be paused. Pressing the trigger

button when stimulation is on starts the second phase of a Neuroprosthesis

program.

CAUTION: Remove the Orthosis to stop stimulation when the

Control Unit is not operable or accessible and the Orthosis

trigger button is disabled.