User's Manual

69
Chapter 9 - Operating the H200 Wireless System
9
Chapter
Operating the NESS H200 Wireless
System
RF Communication Features
The Control Unit and Orthosis must be within RF communication range to
communicate wirelessly. The communication range is approximately 10 feet.
If RF communication fails, the RF communication indicator on the H200
Wireless Control Unit will FLASH RED
.
Turning On the System
Press the on/off button on the Control Unit once. The system will start
in standby mode. All display indicators on the Control Unit and the Orthosis
will light up for a few seconds while the system performs a self-test.
When the system is on:
• The
on/off button on the Control Unit will FLASH GREEN.
• The
status light on the Orthosis will FLASH GREEN.
Turning Off the System
Press the on/off button once.