User's Manual

9
Chapter 2 - Device Description and Safety Information
• The H200 Wireless Control Unit and Orthosis are splash proof. Nevertheless,
protect all electronic components from contact with water, such as from
sinks, bathtubs, shower stalls, rain, and snow.
• Excess body hair where the H200 Wireless cloth electrodes touch may
reduce electrode contact with the skin. If necessary, remove excess body
hair with an electric shaver or scissors. Do not use a razor. A razor can
irritate the skin.
• Use only H200 Wireless cloth electrodes supplied by Bioness Inc.
•
Do not use the NESS H200 Wireless System without the cloth electrodes.
• Be sure the H200 Wireless cloth electrodes are wet and securely attached
to the electrode bases before use.
• Wet the H200 Wireless cloth electrodes before use and after every three
to four hours of use.
• Replace the H200 Wireless cloth electrodes at least every two weeks,
even if they appear to be in good condition.
• Always store the H200 Wireless cloth electrodes where they can air dry.
•
When putting on the H200 Wireless Orthosis, make sure the cloth electrodes
uniformly contact the skin.
• Ventilate the skin by removing the H200 Wireless Orthosis for at least 15
minutes every 3 to 4 hours.
• Store the H200 Wireless Orthosis where it can air dry.
• Do not store the NESS H200 Wireless System where temperatures may
exceed the recommended storage temperature range: -25°C (-13°F) to
+70°C (+158°F). Temperature extremes can damage the components.