User's Manual

119

Chapter 15 - Appendix - EMI Tables

NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation

is affected by absorption and reﬂection from structures, objects, and people.

For transmitters rated at a maximum output power not listed above, the recommended

separation distance d in meters (m) can be determined using the equation applicable

to the frequency of the transmitter, where P is the maximum output power rating of the

transmitter in watts (W) according to the transmitter manufacturer.

Note: All calculations were made according to tables 204 and 206 of IEC 60601-1-2

for equipment that is not life-supporting using factors of 3.5 in 0.15–800 MHz and 7 in

800–2500 MHz. There are no requirements for ISM bands in these tables.