User's Manual

95
Chapter 12 - Electronic Registration of Replacement Parts
5. When registration is complete:
•
(“C” for complete) will appear in the digital display.
• The
Control Unit status light and the Orthosis status
light will turn GREEN for a few seconds.
• The Control Unit will beep.
Note: If (“E” for error) appears in the digital display and the Control Unit
status light turns RED, an error has occurred. Turn on the Control Unit. If
("U" for unregistered) appears in the digital display, the system is unregistered.
Turn the Control Unit off and repeat the registration process.
Note: Components can only be successfully registered once. Additional
attempts will generate an error indication.
6. After registration is complete, turn on your H200 Wireless System. If the
Control Unit is registered to the Orthosis, the Orthosis will turn on.
Note: If the RF communication indicator on the Control Unit is FLASHING
RED, registration failed. Repeat the registration procedure.