Manualshelf

User's Manual

ManualsBrandsBioness Neuromodulation ltd. A Bioness ManualsElectronicsRF wireless orthosis
101102103104105106107108109110
94
User's Guide
5. Copy the System ID Number onto the blank label on the replacement
system component.
Registration
1. Simultaneously press and hold for three seconds the trigger button
and the
minus button on the H200 Wireless Control Unit.
2. Press the trigger button on the wrist bridge of the Orthosis.
3. The Control Unit will beep when registration begins.
4. The Control Unit digital display will show
two alternating GREEN
arches while registration is in process. See Figure 12-3.
Registration
Error
Registration
Complete
Registration
in Process
Figure 12-3: Registration digital displays.