COOLMOISTURE humidifier MODEL BCM4505 BCM4509 BCM4510 Read instructions before operating. Retain for future reference. Instruction Leaflet ☎ INFO-LINE If after having read this leaflet, you have any questions or comments on your humidifier, call 1-800-253-2764 in North America.
HUMIDIFIER SAFETY PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet. 3. Keep the cord out of heavy traffic areas.
HUMIDIFIER SAFETY PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet. 3. Keep the cord out of heavy traffic areas.
The length of cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the humidifier. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.
The length of cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the humidifier. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.
2. Set the humidifier to the desired room humidity level by pressing the (+) or (–) buttons, in increments of 5%. If you scroll past the maximum setting of 65%, the display will automatically loop back to 30%. 3. Now the desired room humidity level is set. NOTE: When the humidity in the room is less than the level you have programmed, the humidifier will continue to produce moisture. Once the room humidity level has been achieved, the humidifier will turn off.
2. Set the humidifier to the desired room humidity level by pressing the (+) or (–) buttons, in increments of 5%. If you scroll past the maximum setting of 65%, the display will automatically loop back to 30%. 3. Now the desired room humidity level is set. NOTE: When the humidity in the room is less than the level you have programmed, the humidifier will continue to produce moisture. Once the room humidity level has been achieved, the humidifier will turn off.
4. Put the wick filter back in the base, replace the humidifier housing, then refill the water reservoir with cool tap water as instructed under “Filling the Water Reservoir.” 5. If moisture forms on the walls or windows, turn off the humidifier. Weekly Maintenance Remove scale: 1. Repeat steps 1-3 above. 2. Clean the base by partially filling the base with one 8-oz cup of undiluted white vinegar, or use Clean-Away® by Bionaire®.
4. Put the wick filter back in the base, replace the humidifier housing, then refill the water reservoir with cool tap water as instructed under “Filling the Water Reservoir.” 5. If moisture forms on the walls or windows, turn off the humidifier. Weekly Maintenance Remove scale: 1. Repeat steps 1-3 above. 2. Clean the base by partially filling the base with one 8-oz cup of undiluted white vinegar, or use Clean-Away® by Bionaire®.
Troubleshooting for your Cool Mist Humidifier Trouble • Power light not illuminated. Probable Cause ☛ Unit not plugged in. ☛ Power failure. Solution ✔ Plug in unit. ✔ Check circuit breaker or outlet. • “Empty/Refill” light illuminated. ☛ Water reservoir empty. ☛ Scale build-up in base. ☛ Scale build up on float ✔ Refill Water reservoir. ✔ Remove base and flush out residue. ✔ Clean float tubes and float. • Mist output minimal to none. ☛ Filter has not absorbed water. ☛ Mineral buildup in base.
Troubleshooting for your Cool Mist Humidifier Trouble • Power light not illuminated. Probable Cause ☛ Unit not plugged in. ☛ Power failure. Solution ✔ Plug in unit. ✔ Check circuit breaker or outlet. • “Empty/Refill” light illuminated. ☛ Water reservoir empty. ☛ Scale build-up in base. ☛ Scale build up on float ✔ Refill Water reservoir. ✔ Remove base and flush out residue. ✔ Clean float tubes and float. • Mist output minimal to none. ☛ Filter has not absorbed water. ☛ Mineral buildup in base.
