User manual

3
HANGING LIGHT INSTALLATION
3.1
Install Hanging Lights high and in center of room. Use Hook to secure light around beams or poles or use cord clip to
secure cord to ceiling to prevent damage.
3.3
Position Light Switch at accessible height and secure to wall with [2x] screws or nails.
3.4
Connect up to 2 Hanging Lights directly to Control Box. Connect third light via Extension Port of previously connected
Lights. Lights can be connected in any order.
3.2
Hook can also be used to angle Hanging Light.
NOTE
The SolarHome 620 includes 3 hanging lights: 2 Hanging Lights and 1 Security Light with Motion Sensor. Each light (A)
includes a Light Switch (B), Extension Port (C), Hook (D), and Connector (E)
OR
OR
A
D
C
E
B
x2
7 8