Use Instructions

• Remove the BioButton prior to
any defibrillation events. Clinical
validation has not been performed for
persons who have a defibrillator or
pacemaker device.
• Keep the device away from children
and pets. The BioButton device may
be a choking hazard and may be
harmful if swallowed.
• Press the BioButton’s button regularly
to verify that it is working.
• DO NOT wear device over excessive
body hair. Excessive body hair should be
trimmed using only an electric trimmer,
before application.
• DO NOT place on broken skin including
wounds, sores, or abrasions.
• DO NOT submerge the device in more
than 3 feet of water or submerge for
longer than 30 minutes at a time.
Prolonged exposure to water may cause
the device to loosen from the skin.
• DO NOT continue wearing if severe
discomfort or irritation occurs.
• DO NOT exert excessive force, drop,
modify, or attempt to take apart the
device. Doing so may cause malfunction
or permanent damage.
• DO NOT wear or use the BioButton during
a magnetic resonance imaging (MRI)
procedure or in a location where it will
be exposed to strong electromagnetic
forces.
Can I shower or exercise with the
BioButton? Yes, the BioButton is water
resistant and can be worn during showers
and exercise. Do not apply any deodorant
or lotion to the placement areas as it will
reduce adhesion of the device to the skin.
Can I swim or bathe with the BioButton?
Yes, the BioButton is water resistant and
will continue working as long as it is not
submerged more than 3 feet or kept
underwater for longer than 30 minutes at
a time. Prolonged exposure to water may
cause the device to loosen from the skin.
I’m experiencing some skin irritation,
what should I do? Minor skin irritation
and itching may occur while wearing the
BioButton. If a severe reaction develops
(i.e. hives or blisters), discontinue wearing
and immediately contact your physician.
How long should I wear my device?
Please wear your device for the entire
monitoring period, but no longer than 90
days. Each adhesive may be worn for up
to 7 continuous days. You may replace the
adhesive more often, as needed, to ensure
good contact is maintained with the skin.
How do I know my device is working?
Press and release BioButton’s button.
The device light will blink 4 times. If the
device does not blink or blinks more than
4 times, please immediately contact
Customer Support.
I’ve tried activating the device several
times, and the light still won’t blink.
What do I do? Contact Customer Support
immediately (see front cover). You may be
instructed to return the device and may
receive a replacement kit if more data is
needed for the monitoring period.
• When no longer sticky.
• If you experience minor
irritation or redness in
placement area.
REPLACE YOUR ADHESIVE
REMOVE adhesive from bottom
of device. Follow steps 4 thru 6
to put on a new adhesive and
reapply BioButton.
SKIN SIDE
WARNINGS & PRECAUTIONS
TROUBLESHOOTING & FAQS
When replacing the adhesive, it is
advised to apply the device in a dierent
location within the placement area.
SEPTEMBER 2020 BBN-LBL-DWG-IFU Rev.0
PRESS
LIGHT
Press the BioButton’s button and
confirm the light blinks 4 TIMES.
If the device blinks more than
4 times or does not blink at all,
please contact support.
VERIFY DEVICE IS WORKNG
For tips on long-term wear and
additional adhesive support, visit:
BioIntelliSense.com/support
If additional support is required,
please call 888.908.8804
or email
[e-mail]
SUPPORT
Manufactured by BioIntelliSense, Inc.
570 El Camino Real #200, Redwood City, CA 94063
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Proprietary & Confidential - Page 2 of 3 - Uncontrolled if Printed