Use Instructions

Version: BBN-LBL-IFU-FULL Rev. 0.5 4
Use Instructions
BEFORE YOU START
a. Download and install the BioMobile
TM
app for iOS or Android phones.
We support iOS 13+ and Android 9+
b. Set up BioHub
TM
unit by following the instructions in the BioHub box.
DO NOT proceed until BioMobile app or BioHub is set up.
GET STARTED
1. Press and hold the button for 2 SECONDS. Proceed when the LIGHT blinks repeatedly.
2. Locate area on UPPER LEFT CHEST, two inches below collar bone.
3. TRIM ANY BODY HAIR using only an electric trimmer and CLEANSE AREA with a warm, damp cloth.
4. Find adhesive. Peel backing from DEVICE SIDE of adhesive.
5. Place the BioButton ON the exposed adhesive. Turn over and REMOVE remaining adhesive backing.
6. ADHERE BioBioButton to chest. Apply pressure for 15 seconds
You’re done!
LIGHT PATTERN MEANINGS
Press the BioButton’s button and confirm the light blinks 5 times.
LIGHTS MEANING
4 regular blinks
Actively monitoring
5 rapid blinks
Worn for maximum wear time (up to 90 days)
10 rapid blinks (repeated 4 times)
Not monitoring, connect to BioMobile app or
BioHub to restart monitoring
Solid light or no light
Error detected, contact support immediately