Instruction manual
PROGRAM
PROGRAM
1
2
3
4
5
Important Safety Information 4 - 7
What is Electronic Nerve Stimulation? 8
Machine Overview and Part Names 9
Functions and Programmes 10
Electroflex Output Wave Forms 11 - 12
How to Operate 13 - 15
Cleaning 16
Troubleshooting and Maintenance 17
Technical Specifications 18
Warranty 19
Important information 20 - 23
For detailed operation of your ElectroFlex
™
Circulation Massager Electrical Stimulator please refer to the
comprehensive instructions within this manual.
To use ElectroFlex immediately follow this 5 point quick start guide.
Remove your ElectroFlex Circulation Massager from the
packaging. Connect the DC adapter to a suitable mains
outlet and plug the small DC socket into the device.
Turn on the power the central display will light up blue for
2-3 seconds and then turn off again, this is normal. Hold
down the central power switch for 3-4 seconds. The main
display will light up blue and remain on.
Remove your footwear and socks or stockings. Your feet
need to be completely bare to experience the
ElectroFlex micro current stimulation massage therapy.
There are 10 different treatment programmes, each
offering a range of micro-current massage therapies.
Select a number from 1 - 10 by pressing the P+ and P–
buttons. We suggest you try all 10 over time to decide
which best suits you.
Sit in a comfortable chair. Place your bare feet on the left
and right foot plates. Increase the intensity levels for
each foot by pressing the
︿
to increase the intensity
and
﹀
to decrease for BAND 1. The intensity level ranges
from 0 to 40, slowly increase the level until you begin to
feel the micro-current stimulation.