User's Manual

Error
messages
Causes Measures Remarks
0 error Weak pulse signal Switch the device off, re
-
apply the cuff and repeat
the measurement.
1 error Pump-up operation too slow
or cuff is losing air
Switch the device off, re
-
apply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
2 error Systolic blood pressure can-
not be determined.
Switch the device off, re-
apply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
3 error Cuff pressure is too high
(higher than 300 mmHg).
Switch the device off, re-
apply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
4 error Diastolic blood pressure
cannot be determined or
is outside of the measuring
range.
Switch the device off, re
-
apply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
Error
messages
Causes
Measures Remarks
5 error Air released too quickly Switch the device off,
reapply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
6 error Air released too slowly Switch the device off,
reapply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
7 error Systolic blood pressure is
outside of the measuring
range.
If the measured value does
not correspond with the
way you feel, repeat the
measurement.
8 error Average blood pressure lies
outside of the measuring
range.
If the measured value does
not correspond with the
way you feel, repeat the
measurement.
9 error Cuff pressure is too low Switch the device off,
reapply the cuff and repeat
the measurement.
If this error message appears re
-
peatedly, have the device checked
by the manufacturer.
Error messages/causes of error and measures to take
7
36 37