User's Manual

16 17
Step 3:
When you press the SET button again, you
activate the month display.
Step 4:
Keep pressing the MEM button until the cor
-
rect month is displayed.
Step 5:
By pressing the SET button again, you acti
-
vate the day display.
Step 6:
Keep pressing the MEM button until the cor
-
rect day is displayed.
Step 7:
By pressing the SET button again, you acti
-
vate the hour display.
Step 8:
Keep pressing the MEM button until the cor
-
rect hour is displayed.
Step 9:
By pressing the SET button again, you acti
-
vate the minute display.
Step 10:
Keep pressing the MEM button until the cor
-
rect minute is displayed.
Step 11:
If you are finished making settings, you can
exit the settings menu by pressing the On/Off
button. Otherwise, continue making settings
by pressing the SET button.
2.5 Setting the unit of measurement
Note:
The blood glucose values can either be
displayed in mg/dl or in mmol/l. The setting
of the unit of measurement can be found in
the settings menu sequence after the date
and time.
Step 1:
To change the unit of measurement, press the
SET button until the set unit of measurement
starts blinking on the display (see figure on
page 18, blinking unit of measurement).
Getting started
2