User's Manual

14 15
Step 2:
As soon as the year starts blinking on the
display, keep pressing the MEM button until
the correct year appears.
While you are in the settings menu, the
buttons have the following functions:
SET button:
If you press the SET button with the meter
switched off, you will get into the settings
menu. The year of the date is the first setting
which can be made. You can tell which
parameter can be set at any given time by its
blinking. If you press SET again, you proceed
to the next settable parameter.
MEM button:
By pressing the MEM button, you can change
the currently blinking parameter until it takes
on a value you desire. Now you can go to the
next parameter by pressing the SET button,
or you can exit the settings menu by pressing
the On/Off button.
Note:
If you keep the MEM button pressed, you can
change the active parameter faster.
Pressing the SET button
On/Off button:
By pressing the On/Off button, you exit the
settings menu and the set parameters are
saved.
2.4 Setting the date and time
Note:
The measured blood glucose values are
stored with the date and time. The correct
setting of the date and time makes it easier
for you to make a correct time allocation of
your measurements.
In order to set the correct date and time on
your measuring device, proceed as follows:
Step 1:
With the device switched off, first press
the SET button with a small, flat object
(e.g. paper clip).
gluco-comfort
biocomfort
mem
Getting started
2