User's Manual

4 5
Test strip
Display
Memory button:
1. Switch on device
(memory mode)
2. Selection button
(lower to higher value)
3. Select user
Set button
1. Switch on device (setting mode)
2. Selection button (next field)
3. Switch off device after the last
field has been set
On/Off button
1. Switch on device
(measuring mode)
2. Switch off device
3. Confirm user selec
-
tion
Control elements
Sample capillary
1 Number field for: blood glucose measurement,
user no., year and code no.
2 “Blood drop” symbol: Prompt to apply blood to
the measuring field of the test strip
3 Number field for date
4 Battery symbol
− constant: weak battery
− blinking: dead battery
5 Number field for
− Year
− Time
− User activated / not activated
− Wireless connection activated / not activated
6 Symbol for active wireless connection (BGM 105)
7 Code no. indication when code chip inserted





   

   



8 Error indication = error code
9 User no. indication
10 Indication of the set unit of measurement
(to be set in set mode)
11 Indication whether measured value too “high”
or too “low”
12 Indication of stored measurement
(= ”memory function”)
13 Indication of control solution measurement
(is not stored)
14 Days, e.g. 7, 14, 21, 28, from which the average
blood glucose values are to be calculated
15 Indication of average measurements
for 7, 14, 21, 28 days
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Display elements
mem
biocomfort