User's Manual

26 27
mem
gluco-comfort
biocomfort


Step 2:
Remove one test strip from the package.
Make sure that you close the package imme
-
diately after removing the strip.
Note:
Please observe the separate user instructions
for the test strips.
Step 3:
With the device switched off, guide the test
strip with the darker side facing up into the
test strip receptacle in the direction of the ar
-
row until you feel it click into place.
Step 4:
If the test strip is positioned correctly, the
device switches on automatically.
Step 5:
The user identity number of the measured
value memory where the result of the last
blood glucose measurement was stored
blinks on the display (see Section 3.5
“Use by multiple persons”).
Step 6:
If the user identity number doesn’t agree
with your measured value memory, press the
MEM button until the identity number of your
measured value memory appears.
Step 7:
Confirm the measured value memory selec
-
tion by pressing the On/Off button.
The meter acknowledges this with a beep.
Step 8:
In the top part of the display, the last stored
test strip code number appears, and in the
bottom part, the test strip symbol.
mem
gluco-comfort
biocomfort




Carrying out the blood glucose measurement
3