User's Manual

36 37
4.1 Measuring weight only in “guest” mode
This mode can be activated if only the
weight is to be measured without storing
the measured values or if the scale is used
by a person whose data wasn’t entered in
the parameter memory, such as a guest.
The scale is first in its idle state, the so-
called sleep mode, where only the current
time is displayed (Fig. 3.2).
Step 1:
Now tap with your foot briefly and firmly
on the standing area of your scale, or press
the START button. All display elements
(Fig. 3.4) appear until the user no. of the
user is displayed who used the scale last.
Or “0” appears, which means that the
scale is already in guest mode, where the
impedance value isn’t measured, which
also means that there is no analysis of the
4 Carrying out a measurement
Carrying out a measurement
4