Owner`s manual

27
SETTING THE METER AND DELETING
THE MEMORY
Your meter comes with the time, date, unit of measure-
ment and unit of temperature preset. However if you need
to change the time, or if you replace the batteries, you may
need to enter the setting mode and reset.
Please set the time, date, unit of measurement and temper-
ature or delete memory according to the follow-up steps.
To set the time, you must rst enter the setting mode. Start
with the meter off. Then press the set button located in
the battery compartment. The meter is now in the setting
mode.
STEP 1 Set the Year
The year appears rst, with the number
ashing. Press and release the M button
to advance one year. To move faster, hold
the M button down. With the correct year
on the display, press the set button and
the date will appear on the display with the
month segment ashing.
STEP 2 Set the Month
Press and release the M button until the
correct month appears. To move faster,hold
the M button down . With the correct month
on the display , press the set button and
the date segment will start ashing.