Owner`s manual

VIEWING RESULTS ON A PERSONAL

COMPUTER

Results in memory can be transmitted to a personal com-

puter. Health Care System Software and an interface cable

are required before installation. The software can be down-

loaded from the home page of TaiDoc Technology Corp.

The interface cable is an optional accessory. To learn more

about Health Care System Software or to obtain an Inter-

face Cable separately, please contact your local customer

service.

STEP 1 Install Software

Install Health Care System Software on your Computer by

following the instructions provided on TaiDoc's website:

http://www.taidoc.com.

STEP 2 Connect to Personal Computer

Connect the interface cable to a serial Port of your com-

puter. With the meter turned off, connect the Interface

Cable to the Data Port of the

meter. "PC" will appear on the

display, indicating that the monitor

is ready to transmit data.

STEP 3 Transmit Data

Follow the instructions provided in the software to transmit

data. Results transmitted will include date and time. Re-

move the cable and the meter will automatically turn off.

NOTE !

While the monitor is connected to the PC, it is unable to perform a

blood glucose.