Owner`s manual

20
Step-by-Step Test Procedure
STEP 1 Insert the Test Strip
Fully insert test strip face up with con-
tact bars end rst, into the test slot.
The meter will turn on automatically
and display the following in sequence:
“CH” and “ ” room temperature
ashing “ ”.
STEP 2 Apply Sample
Obtain a drop of blood using the ad-
justable Lancing Device. The blood
sample must be at least 0.7 microliter
in volume ( actual size) or you may
get an inaccurate test result. When “
” appears on the display, apply blood
to the absorbent hole of the test strip
where it meets the narrow channel. Do
not push your nger against the test
strip or try to apply a smeared sample.
The blood should be completely lled
the conrmation window before the
meter begins to count down. If not, do
not try to add more blood to the test
strip. Discard the test strip and retest
with a new one.If you have trouble ll-
ing the test strip, please contact the
dealer for assistance.