B IO B ID E T B B C-70 WARNING Do Not over-tighten plumbing connections. Over-tightening plumbing connections can damage parts and cause leak.
B IO B ID E T B B C-70 Parts List $+1 $+&'6 5+/2.
B IO B ID E T B B C-70 Configuration $+1 $+&'6 5+/2.
B IO B ID E T B B C-70 Tighten nuts while checking for leaks. Do Not over tight.
B IO B ID E T B B C-70 Installation Instructions 1. CAUTION Do Not over tight any connections. Over tightening connections and adaptor can cause damage to the parts. 2. PROCEDURES OF ASSEMBLY 31 Shut water supply by turning it to the right and disassemble the water hose. Flush toilet to drain water inside of toilet water tank before disassembling the water hose.
B IO B ID E T B B C-70 Remove existing seat and lid. Release the bolts on both side of the existing toilet seat. 2 3 Connect supplied T valve to the toilet fill valve. Note T valve will be connected directly to toilet fill valve, not the shut off valve. Then connect rest of water lines to connected T valve. 4 3 Mount bidet and toilet seat/lid over toilet mounting holes. Supplied rubber O-rings should be placed under the bidet mounting bracket to protect and secure bidet on the toilet.
B IO B ID E T B B C-70 Thankyou Technical support / Customer Service Bio Bidet 205 Berg ST Algonquin, IL 60102 T : 847.458.2334 U.S TOLL FREE : 877.339.5214 support@biobidet.com www.biobidet.
