Full Product Manual

26 27
SPECIFICATIONS
ITEM A7
Standard power supply AC 120V 60Hz 1248W
Water
Supply
Way of connection Direct connection to tap water
Water pressure 0.07 MPa ~ 0.74 MPa
Cleansing Spray for cleansing 700 (±150) ml/min
Spray for bidet 700 (±150) ml/min
Water capacity 740 ml
Spray temperature Room temp ~ 39°C (102.2°F)
Heater capacity 1200W
Safety feature Thermal switch, temperature fuse,
floating switch
Heated
Seat
Seat temperature Room temp ~ 39°C (102.2°F)
Heater capacity 48W
Safety feature Temperature fuse
Deodorization method -
Circuit breaker Within 15mA 0.03 second
Length of power cord 1.2m
Dimensions (W) 481 mm (18.94 inches) x (L) 528mm
(20.79 inches) x (H) 160mm (6.30 inches)
Weight 4.6 Kg (10.14 lbs)
• Recommended water supply pressure are 0.1 ~ 0.69 MPa.
• The minimum available water supply pressure is 0.07 MPa,
however 0.1 MPa pressure, water spray pressure might not be adequate.
PROBLEM POSSIBLE CAUSE SOLUTION
Completely
fails to work
• Is there a power
cord outage?
• Is the power
cord unplugged?
• Are you sitting on
the seat correctly?
• Check for power cord
failure or a tripped
breaker.
• Plus the power
cord in properly.
• Sit on the
seat completely.
Water does
not spray
• Is the water shuto
valve closed?
• Is the strainer clogged?
• Are the nozzles clogged?
• Is the water purifying
filter clogged?
• Check for any water
leaking or dripping
• Clean the strainer
• Clean the nozzles
• Change the water
purifying filter
Water is
leaking or
dripping
• Are all the hoses
tightened up properly?
• If the water is still
leaking or dripping,
contact your dealer
Seat or
water is
not warm
enough
• Is the temperature
set to OFF?
• Is the appliance used in Eco
mode during cold weather?
• Reset the temperature.
• Press “Eco” again to
release the function.
BEFORE CALLING FOR SERVICE