B IO B ID E T WARNING A3 2
B IO B ID E T A3 Parts List Name Quantity Bidet 1 7/8” T Adapter 1 Braided Metal Hose 1 Protective O rings 2 Owner’s Manual 1 5
B IO B ID E T A3 Configuration 7.88" 6.69" 4.88" 4.33" 5.
B IO B ID E T A 3 Tighten connections while checking for leaks. Do not over tighten.
B IO B ID E T A 3 Installation Instructions 1. CAUTION Do Not over tighten any connections. Over tightening connections and adaptor can cause damage to the parts. 2. PROCEDURES OF ASSEMBLY 31 Shut water supply off by turning it to the right and disassemble the water hose. Flush toilet to drain water inside of toilet water tank before disassembling the water hose.
B IO B ID E T Remove existing seat and lid. Release the bolts on both sides of the existing toilet seat. 2 Connect supplied universal 7/8” T valve to the fill valve underneath of toilet water tank and connect water supply hose between universal 7/8” and shut off valve 3 Seat 43 53 A3 Mount bidet and toilet seat/lid over toilet mounting holes. %>9952.- ;>++.; ! ;270< <18>5- +. placed under the bidet mounting bracket to protect and secure the bidet on the toilet.
B IO B ID E T A 3 Thankyou Technical support / Customer Service Bio Bidet 204 Berg ST Algonquin, IL 60102 T : 847.458.2334 U.S Toll Free : 877.339.5214 support@biobidet.com www.biobidet.
