Product Label
To protect pollinators when blooms are present, apply the product during
early morning or late evening, when bees are not foraging. If applied prior to
bloom, or blooms are removed or petal fall is complete, applications may be
made during the day.
RESTRICTIONS
•
Do not make applications during rain.
•
Avoid making applications when rainfall is expected before the product has
sufficient time to dry (minimum 4 hours).
•
Rainfall within 24 hours after application may cause unintended runoff of
pesticide application.
•
Do not apply when the wind speed is greater than 15 mph.
•
Do not spray the product into fish pools, ponds, streams, or lakes.
•
Do not apply directly to sewers or storm drains, or to any area like a drain or
gutter where drainage to sewers, storm drains, water bodies, or aquatic
habitat can occur.
•
Do not allow the product to enter any drain during or after application.
•
Do not apply directly to impervious horizontal surfaces such as sidewalks,
driveways, and patios.
•
Do not apply or irrigate to the point of runoff.
•
Remove animal feeding dishes prior to application.
•
Do not use in small, enclosed areas where spray may be inhaled.
•
Do not apply to fruits or vegetables used for food.
•
Do not use indoors - for houseplants, move them outside, treat, let dry and
bring back indoors.
•
For outdoor residential use only.
•
Do not apply to areas which are waterloed or saturated, which will not
allow penetration into the root zone of the plant.
•
Do not apply this product while bees are foraging.
•
Do not treat or apply to lawns or turf
•
Do not apply more than 13 treatments per year. In Nassau and Suffolk
Counties in New York State, do not apply more than 3 times per given area
per year.
•
Do not treat plants during periods of stress, i.e. heat, drought, flooding,
insects, excessive fertilizer, herbicides or pesticide use, etc.
•
Do not apply when temperatures are above 85°F.
•
For application to individual plants only use conventional pump up
sprayers at labeled rates.
•
If disease is already present, this product will not eliminate it.
•
Not for use on plants being grown for sale or other commercial use, or for
commercial seed production, or for research purposes. For use on plants
intended only for aesthetic purposes or climatic modifications and being
grown in interior plantscapes, ornamental gardens or parks, or lawn and
grounds. Only use this product on plants being grown for aesthetic or
BEFORE YOU APPLY
DIRECTIONS FOR USE
It is a violation of Federal law to
use this product in a manner inconsistent with its labeling.
Read and follow all label restrictions and directions when
using this product.
climatic purposes and in interior and exterior sites, such as, gardens, parks,
lawns, and grounds, and other ornamental sites. Do not use on vegetation
intended for sale or other commercial uses. Do not use on plants grown for
seed production or research purposes.
•
Spot treatments must not exceed two square feet in size (for example, 2 ft.
by 1 ft. or 4 ft. by 0.5 ft.).
•
For foliar applications, do not apply by ground within 25 feet of lakes,
reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries
and commercial fish farm ponds.
When insects*, plant mites, or disease* first appear.
•
To avoid serious damage, treat pests and diseases early in the season before
they multiply.
WHERE TO USE
WHEN TO USE
•
Kills insects* on contact and keeps on killing for up to 14 days.
•
For control of Japanese beetles, plant mites, severe infestations of other
pests* and diseases*. Repeat every 14 days as necessary.
HOW OFTEN
This product provides 3 way action: kills existing pests, forms protective barrier
on outside of plant and is absorbed into the plant regardless of weather
conditions. This product provides 3 way action: kills insects* on contact,
controls plant mites, and controls diseases*, and keeps on protecting for up to
2 weeks. The maximum application rate for Bifenthrin is 0.114 lbs ai/A. The
maximum application rate for Myclobutanil is 0.105 lbs ai/A.
HOW IT WORKS
Treats up to 16 rose bushes
†
(436 sq. ft, each bush 5 ft by 5 ft)
Apply at a rate of 3 fl oz per 10 sq. ft
COVERAGE
•
Shake well before using
•
Adjust nozzle to desired spray pattern.
•
Hold sprayer about 12 inches from foliage.
•
Spray leaves, stems, and tender new shoots.
•
To kill insects that may hide, spray the underside of the leaves. Apply until
leaves are evenly coated with spray, but not dripping (3 fl oz per 10 sq. ft).
HOW TO USE
Outdoors on rose bushes
†
, flower plants
†
, ground covers, vines, ornamentals,
shrubs, and trees
•
Azaleas, Camellias, Rhododendrons and other shrubs
†
•
Houseplants/container plants (treated outside)
•
For use on non-edible
plants only.
†
Apply when pollinators are not present *listed