Product Label
To protect pollinators when blooms are present, apply the product during early morning or late
evening, when bees are not foraging. If applied prior to bloom, or blooms are removed or petal
fall is complete, applications may be made during the day.
RESTRICTIONS
•
Do not make applications during rain.
•
Avoid making applications when rainfall is expected before the product has sufficient time
to dry (minimum 4 hours).
•
Rainfall within 24 hours after application may cause unintended runoff of pesticide
application.
•
Do not apply when the wind speed is greater than 15 mph.
•
Do not spray the product into fish pools, ponds, streams, or lakes.
•
Do not apply directly to sewers or storm drains, or to any area like a drain or gutter
where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur.
•
Do not allow the product to enter any drain during or after application.
•
Do not apply directly to impervious horizontal surfaces such as sidewalks, driveways, and
patios.
•
Do not apply or irrigate to the point of runoff.
•
Remove animal feeding dishes prior to application.
•
Do not use in small, enclosed areas where spray may be inhaled.
•
Do not apply to fruits or vegetables used for food.
•
Do not use indoors - for houseplants, move them outside, treat, let dry and bring
back indoors.
•
For outdoor residential use only.
•
Do not apply to areas which are waterloed or saturated, which will not allow
penetration into the root zone of the plant.
•
Do not apply this product while bees are foraging.
•
Do not treat or apply to lawns or turf
•
Do not apply more than 13 treatments per year. In Nassau and Suffolk Counties in New York
State, do not apply more than 3 times per given area per year.
•
Do not treat plants during periods of stress, i.e. heat, drought, flooding, insects, excessive
fertilizer, herbicides or pesticide use, etc.
•
Do not apply when temperatures are above 85°F.
•
For application to individual plants only use conventional pump up sprayers at labeled rates.
•
If disease is already present, this product will not eliminate it.
•
Not for use on plants being grown for sale or other commercial use, or for commercial seed
production, or for research purposes. For use on plants intended only for aesthetic purposes
or climatic modifications and being grown in interior plantscapes, ornamental gardens or
parks, or lawn and
grounds. Only use this product on
BEFORE YOU APPLY
DIRECTIONS FOR USE
It is a violation of Federal law to use this product
in a manner inconsistent with its labeling.
Read and follow all label restrictions and directions when using
this product.
When insects*, plant mites, or disease* first appear.
•
To avoid serious damage, treat pests and diseases early in the season before they multiply.
WHERE TO USE
WHEN TO USE
•
Kills insects* on contact and keeps on killing for up to 14 days.
•
For control of Japanese beetles, plant mites, severe infestations of other pests* and
diseases*. Repeat every 14 days as necessary.
HOW OFTEN
This product provides 3 way action: kills existing pests, forms protective barrier on outside of
plant and is absorbed into the plant regardless of weather conditions. This product provides 3
way action: kills insects* on contact, controls plant mites, and controls diseases*, and keeps on
protecting for up to 2 weeks. The maximum application rate for Bifenthrin is 0.114 lbs ai/A. The
maximum application rate for Myclobutanil is 0.105 lbs ai/A.
HOW IT WORKS
Treats up to 3 rose bushes
†
(81 sq. ft, each bush 5 ft by 5 ft)
Apply at a rate of 3 fl oz per 10 sq. ft
COVERAGE
•
Shake well before using
•
Adjust nozzle to desired spray pattern.
•
Hold sprayer about 12 inches from foliage.
•
Spray leaves, stems, and tender new shoots.
•
To kill insects that may hide, spray the underside of the leaves. Apply until leaves
are evenly coated with spray, but not dripping (3 fl oz per 10 sq. ft).
HOW TO USE
plants being grown for aesthetic or climatic purposes and in interior and exterior sites,
such as, gardens, parks, lawns, and grounds, and other ornamental sites. Do not use on
vegetation intended for sale or other commercial uses. Do not use on plants grown for seed
production or research purposes.
•
Spot treatments must not exceed two square feet in size (for example, 2 ft. by 1 ft. or 4 ft.
by 0.5 ft.).
•
For foliar applications, do not apply by ground within 25 feet of lakes, reservoirs, rivers,
permanent streams, marshes or natural ponds, estuaries and commercial fish farm ponds.
Outdoors on rose bushes
†
, flower plants
†
, ground covers, vines, ornamentals, shrubs, and
trees
•
Azaleas, Camellias, Rhododendrons and other shrubs
†
•
Houseplants/container
plants (treated outside)
•
For use on non-edible plants only.
†
Apply when pollinators are not present *listed