Instructions / Assembly

Spray when listed insects or damage first appear. Refer to specific use area for
additional instructions.
WHEN TO USE
• Shake well before using.
• Adjust nozzle on your sprayer to desired spray pattern.
• Hold sprayer about 12 inches from foliage.
• Spray leaves and tender new shoots.
• To kill listed insects that may hide, spray the underside of the leaves. Apply until leaves
are evenly coated with spray, but not dripping.
CONNECT
1. Shake well before use.
2. Connect sprayer to garden hose.
3. Turn on water.
SPRAY
1. Extend hose to farthest area to be treated, point sprayer nozzle in direction to be sprayed.
2. Begin spraying, Press lock tab while using other hand to turn sprayer valve to ON position.
3. Walk at a steady pace while spraying, using an even sweeping motion, and slightly
overlap the treated areas. Work back toward the faucet to avoid walking over wet,
treated area.
FINISH
1. To stop spraying, Press lock tab while using other hand to turn sprayer valve to OFF
position.
2. Turn o water at faucet.
3. Relieve water pressure in hose by turning sprayer valve back to ON position until water
slows to a drip then turn sprayer valve to OFF position.
4. Disconnect sprayer from hose.
HOW TO ATTACH AND SPRAY
impervious surfaces such as sidewalks, driveways, patios, porches and structural
surfaces (such as windows, doors, and eaves) are limited to spot and crack and
crevice applications, only.
• Application is prohibited directly into sewers or drains, or to any area like a gutter
where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur.
Do not allow the product to enter any drain during or after application.
BEFORE YOU USE
(cont’d)