Use and Care Manual
FOR OUTDOOR RESIDENTIAL USE ONLY
501437172a 170515V1
EPA Reg. No. 92564-8
EPA Est. No. indicated by 3rd and 4th digits of the batch number on this package.
(75) = 5905-AR-01 (77) = 070989-MO-001 (39) = 58996-MO-1 (57) = 071106-GA-003
ACTIVE INGREDIENT:
Triclopyr, triethylamine salt
. . . . . . . . . . . . . . . . . . 0.8%**
** 0.58% Triclopyr acid equivalent
OTHER INGREDIENTS
. . . . . . . . . . . . . . . . . . . . . . 99.2%
TOTAL 100.0%
•
Adjust spray nozzle to give a coarse spray.
•
Hold sprayer about 12 inches from weed.
•
Spray the weeds you want to kill until thoroughly wet but not dripping.
•
This product will kill or injure all woody plants contacted. Certain warm season grasses may experience temporary yellowing when sprayed to excess.
•
If a desirable plant (other than grass) is accidentally sprayed, immediately rinse with plenty of water.
•
Apply when wind is calm.
•
Keep people and pets o treated areas until spray has dried.
•
Do not apply to or around fruits or vegetables used for food.
•
Rain or water 4 hours after application will not wash away eectiveness.
•
Special Penetrating Formula Kills Even the Toughest Plants
•
Works Systemically, Killing Listed Weeds to the Root
QUICK FACTS
READ THE LABEL FIRST!
KILLS
WHERE TO USE
•
Brush, Vines, Brambles and Other Listed Woody Plants
•
Listed Broadleaf Weeds
Use around homes, cabins, buildings, fences, walkways, trails and wooded areas.
WHEN TO USE
•
When weeds are leafed out.
•
When brush is leafed out
For questions or comments,
call toll-free 1-877-229-3724, or visit us on-line at www.BioAdvanced.com
IMPORTANT: READ AND FOLLOW DIRECTIONS BEFORE USE
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
BEFORE YOU USE
Read and follow these directions when using:
HOW TO APPLY
Shake well before use
•
Adjust nozzle to stream or spray position.
•
Point sprayer downward and squeeze trigger
repeatedly until liquid is released.
SPRAY
•
Turn sprayer nozzle to X (o) position.
•
Do not unplug hose.
•
Return sprayer to bottle. Sprayer will
snap into place.
AFTER USE
•
Remove sprayer from bottle and extend
hose.
•
Open ip-cap on bottle.
•
Insert hose and plug into ip-cap opening
until it snaps into place.
ATTACH SPRAYER
(continued)
Indicaciones
en español
después de las
de inglés
OPEN
Resealable Label
for Directions
&
Precautions