SDS

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control param
eters
Components
CAS-No.
Control parameters
Update
Basis
Imidacloprid
138261-41-3
5ug/m3
(AN ESL)
07 2011
TX ESL
Imidacloprid
138261-41-3
50ug/m3
(ST ESL)
07 2011
TX ESL
Exposure controls
Personal protective equipment
In normal use and handling conditions please refer to the label and/or leaflet. In all other cases the
following recommendations would apply.
Respiratory protection
When respirators are required, select NIOSH approved equipment
based on
actual or potential airborne concentrations and in
accordance with the appropriate regulatory standards and/or industry
recommendations.
Hand protection
Chemical resistant nitrile rubber gloves
Eye protection
Safety glasses with side-shields
Skin and body protection
Wear long-sleeved shirt and long pants and shoes plus socks.
General protective measures
Follow manufacturer's instructions for cleaning/maintaining PPE. If
no such instructions for washables, use detergent and warm/tepid
water.
Keep and wash PPE separately from other laundry.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
yellow to brown
Physical State
granular
Odor
characteristic
Odour Threshold
no data available
pH
no data available
Vapor Pressure
no data available
Vapor Density (Air = 1)
no data available
SBM LIFE
SCIENCE CORP.
SAFET
Y DATA SHEET
BIOADVANCED SCIENCE-BASED SOLUTIONS
12-MONTH TREE &
SHRUB PROTECT & FEED
READY-TO-USE GRANULES II
Version
1.0
/ USA
102000021169
4/10
Revision Date: 02/01/2019