User Manual

Exposure controls
Personal protective equipment
In normal use and handling conditions please refer to the label and/or leaflet. In all other cases the
following recommendations would apply.
Respiratory protection
When respirators are required, select NIOSH approved equipment
based on actual or potential airborne concentrations and in
accordance with the appropriate regulatory standards and/or industry
recommendations.
Hand protection
Chemical resistant nitrile rubber gloves
Eye protection
Safety glasses with side-shields
Skin and body protection
Wear long-sleeved shirt and long pants and shoes plus socks.
General protective measures
Remove contaminated clothing immediately and dispose of safely.
Follow manufacturer's instructions for cleaning/maintaining PPE. If
no such instructions for washables, use detergent and warm/tepid
water.
Keep and wash PPE separately from other laundry.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
colourless
Physical State
liquid, clear
Odor
characteristic
Odour Threshold
no data available
pH
<= 5.5 at 100 %
Vapor Pressure
no data available
Vapor Density (Air = 1)
no data available
Density
ca. 1.00 g/cm³ at 20 °C
Evapouration rate
no data available
Boiling Point
no data available
Melting / Freezing Point
no data available
Water solubility
no data available
Minimum Ignition Energy
not applicable
Decomposition
temperature
not applicable
SBM LIFE SCIENCE CORP.
SAFETY DATA SHEET
BIOADVANCED SCIENCE BASED
SOLUTIONS 3-IN-1 INSECT, DISEASE &
MITE CONTROL READY-TO-USE
Version 1.0 / USA
102000015314
5/11
Revision Date: 01/31/2019