Use and Care Manual
DIRECTIONS FOR USE
DIRECTIONS FOR USE (cont’d)
FOR BEST
RESULTS
•
This product is highly eective when used to prevent disease or when
applied at rst sign of disease. To prevent damage, start treating when
conditions are favorable for disease development in your area, and treat
every 30 days.
•
To control existing disease, reapply every 14 days until lawn shows signs of
recovery. Do not apply more than 16 times per year at a rate of 32 . oz. per
5,000 sq. ft. or 8 times per year at a rate of 32 . oz. per 2,500 sq. ft.
•
Do not treat lawn during periods of stress from heat or drought.
•
Do not apply when temperatures are greater than 85˚F, as injury to lawn
may occur.
•
Rain or watering after spray has dried will not wash away eectiveness.
•
For more information on what you can do to control plant diseases, or to
nd out when disease is common in your area, contact your local County
Extension Service (usually found in the White Pages of the phone book
under the name of your county.)
Do not allow children and pets to enter the treated area until it has dried.
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
For best results, read and follow all label directions.
BEFORE
YOU USE
Read and follow
directions
when using.
•
This product is ready to spray. Just attach this bottle to your hose according
to directions. Water automatically mixes with the concentrate as you spray.
HOW TO USE
Shake Well
Before Use
•
Lawn diseases including Anthracnose, Bermuda grass decline, Brown Patch,
Dollar Spot, Fusarium Blight, Gray Leafspot, Powdery Mildew, Red thread,
Rhizoctonia blight, Rust, Smut, and Summer patch.
CURES &
PREVENTS
•
First determine the area to be treated.
•
Apply entire 32 . oz. bottle to 5,000 sq. ft. It should take about 5 to 6 minutes
to empty the container over the treatment area.
•
For Bermuda grass decline, Fusarium Blight, and Summer patch, apply
entire 32 . oz. bottle to 2,500 sq. ft.
HOW
MUCH
TO USE
This product provides 3-way action: it kills existing fungi, forms a protective
barrier on the outside of the plant and is absorbed into the plant to keep on
protecting regardless of weather conditions.
HOW THIS
PRODUCT
WORKS
HOW TO
AT TAC H
AND
SPRAY
(continued)
•
Do not apply near lakes, streams, rivers or ponds.
•
Do not apply to fruits or vegetables grown for food.
1. Connect your garden hose to the bottle. Be sure the blue water control
valve on top of the spray nozzle is in the OFF position.
2. To begin spraying, turn on water at faucet. Point nozzle
towards the area to be treated and press lock tab while
using other hand to turn sprayer valve to ON position.
3. To stop spraying, turn the water control valve on
top of the spray nozzle to OFF. Turn o faucet.
4. Relieve water pressure by turning water control valve to
the ON position until water slows to a drip.
Turn water control valve back to OFF. Disconnect garden
hose from bottle.
5. The unused portion can be saved and used at a later date.
Tips for Applying
1. Extend hose to the farthest plants to be treated and work back toward the
faucet to avoid contacting wet, treated plants.
2. Use an even sweeping motion, ensuring thorough coverage of both
the top and bottom leaf surfaces.
ON
OFF