SDS

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components CAS
-No. Control parameters Update Basis
Imidacloprid 138261-41-3 5ug/m3
(AN ESL)
07 2011 TX ESL
Imidacloprid 138261-41-3 50ug/m3
(ST ESL)
07 2011 TX ESL
Exposure controls
Personal protective equipment
In normal u
s
e and handling conditions please refer to the label and/or leaflet. In all other cases the
following recommendations would apply.
Respiratory protection
Respiratory protection is not required under anticipated
circumstances of exposure.
In case of insufficient ventilation wear suitable respiratory equipment.
Hand protection
Chemical resistant nitrile rubber gloves
Eye protection
Safety glasses with side-shields
Skin and body protection
Wear long-sleeved shirt and long pants and shoes plus socks.
General protective measures
There are no known hazards associated with this product when used
according to the label directions. The following guidelines should be
followed.
Avoid breathing dust.
Avoid contact with skin and eyes.
Wash hands thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco, using the toilet
or applying cosmetics.
Do not allow children or pets to enter the treated area until granules
have been watered into the soil and the grass or soil is dry.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
dark brown
Phys
ical State
gran
ular
Odor
c
haracte
ristic
Odour Threshold
no data available
pH
6.0 - 6.2 at 5 % (25 °C)
aqueou
s suspension
SBM LIFE SCIENCE CORP.
SAFETY DATA SHEET
BIOADVANCED SCIENCE-BASED
SOLUTIONS TERMITE KILLER
GRANULE
4/9
Revision Date: 02/01/2019
Version 1.0 / USA
102000014898