SDS

SECTION 7: HANDLING AND STORAGE
Precautions for sa
fe handling
Advice on safe handling
Han
dle and
open container in a manner as to prevent spillage. Use only
in area provided with appropriate exhaust ventilation.
Hygiene measures
Remove Personal Protective Equipment (PPE) immediately after
handli
ng this prod
uct. Remove soiled clothing immediately and clean
thoroughly before using again. Wash thoroughly and put on clean
clothing.
Conditions for safe storage, including any incompatibilities
Requirements for storage
areas a
nd container
s
Keep containers tightly closed in a dry, cool and well-ventilated place.
Protect from freezing. Freezing will affect the physical condition but will
not damage the material. Thaw and mix before using.
Protect from freezing.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control para
meters
Exposure controls
Personal protective equipment
In normal u
s
e and handling conditions please refer to the label and/or leaflet. In all other cases the
following recommendations would apply.
Respiratory protection
When respirators are required, select NIOSH approved equipment
based on actual or potential airborne concentrations and in
accordance with the appropriate regulatory standards and/or industry
recommendations.
Hand protection
Chemical resistant nitrile rubber gloves
Eye protection
Safety glasses with side-shields
Skin and body protection
Wear long-sleeved shirt and long pants and shoes plus socks.
General protective measures
There are no known hazards associated with this product when used
according to the label directions. The following guidelines should be
followed.
Avoid inhalation of vapour or mist.
Avoid contact with skin and eyes.
SBM LIFE SCIENCE CORP.
SAFETY DATA SHEET
BIOADVANCED SCIENCE-BASED
SOLUTIONS
CARPENTER ANT & TERMITE
KILLER
PLUS* READY-TO-USE
Version 1.0 / US
A
102000011813
4/10
Revision Date: 05/01/2017
None Established.