User Manual

DIRECTIONS FOR USE
(cont’d)
Shake Well Before Use.
This product is ready to spray. Just attach this bottle to your hose according to directions.
Water automatically mixes with the concentrate as you spray.
For grubs, water product in soon after application.
HOW TO ATTACH & SPRAY
ON LAWNS AND ALONG BUILDING FOUNDATIONS
KILLS
BEFORE YOU USE
HOW TO USE
It is a violation of Federal Law to use this product in a manner inconsistent
with its labeling.
Read and follow all label restrictions and directions when using this product.
RESTRICTIONS
• Do not spray the product into sh pools, ponds, streams, or lakes.
• Remove animal feeding dishes prior to application. Keep people and pets away from
treated areas until spray has dried.
• Do not make applications during rain.
• All outdoor applications must be limited to spot or crack and crevice treatment only,
except for the following permitted uses:
(1) Treatment to soil around structures;
(2) Applications to lawns
(3) Applications to building foundations, up to a maximum height of 3 feet.
• Other than applications to building foundations, all outdoor applications to impervious
surfaces such as sidewalks, driveways, patios, porches, and structural surfaces (such as
windows, doors, and eaves) are limited to spot and crack and crevice applications, only.
• Application is prohibited directly into sewers or drains, or to any area like a gutter where
drainage to sewers, storm drains, water bodies, or aquatic habitat can occur. Do not
allow the product to enter any drain during or after application.
• For Outdoor Residential Use Only.
• Do not apply more than 0.4 lb of imidacloprid (25 bottles) per acre per year. This bottle
contains 0.016 lbs of imidacloprid.
• Do not mow lawn area for 24 hours after application.
• Do not allow runo or puddling of irrigation water following application.
• Do not apply to areas which are water logged or saturated, which will not allow
penetration into the root zone of the plant.
• Not for turf/sod production
Sod webworms
Sowbugs
Spiders
Stink bugs
(including Brown
marmorated stink
bugs and Kudzu bugs)
Ticks
(including Deer ticks)
Wasps
White grubs
Annual bluegrass weevil
(Hyperodes weevil)
Ants
**
Carpenter ants
Armyworms
Billbugs
Bluegrass billbugs
Boxelder bugs
Caterpillars
Chiggers
Chinch bugs
Clover mites
Cockroaches
Crickets
Cutworms
Earwigs
European crane y larvae
Fire ants
Fleas
Flies
Grasshoppers
Hyperodes weevils
Japanese beetles
Mole crickets
Mosquitoes
Pillbugs
** Except pharaoh ants
DIRECTIONS FOR USE
(cont’d)
CONNECT 1. Shake well before use.
2. Securely Connect sprayer to garden hose.
3. Be sure that ON/OFF Switch is in OFF position, toward hose end of sprayer.
4. Turn on water at faucet.
5. For rst time use, remove plastic shipping lock from beneath switch.
SPRAY 1. Extend hose to farthest area to be treated, point sprayer nozzle in
direction to be sprayed.
2. Begin spraying - Push ON/OFF Switch forward into ON position.
3. Walk at a steady pace while spraying, using an even sweeping motion,
and slightly overlap treated areas. Work back toward faucet to avoid
walking over wet, treated grass.
FINISH 1. To stop spraying, push ON/OFF Switch to OFF position.
2. Turn o water at faucet.
3. Relieve water pressure in hose by turning ON/OFF Switch back to ON
position until water slows to a drip, then return ON/OFF switch to OFF
position.
4. Disconnect sprayer from hose.