Accessories User Manual

Accuracy ±1.0% or 0.010 from 0 to 3.0 OD at 490nm

Linearity ±1.0% from 0 to 2.0 OD, ±2.0% from 0 to 3.0 OD

Reproducibility 1.0% or 0.005 OD from 0 to 2.0 OD, 1.5% from 2.0 to 3.0 OD

Inter-channel variation 1.5% or 0.005 OD from 0 to 3.0 OD

Stability and Drift 0.010 OD at OD=1 with single wavelength reading

Temperature set

point

25ºC to 45ºC, 0.1ºC step

Set point must be 5ºC above ambient.

Set point accuracy

Less than ±0.5ºC when set point =37ºC at RT=25ºC

Well to well

uniformity

Less than 0.7ºC when set point =37ºC at RT=25ºC

Incubator

(Factory option)

Warm-up time Less than 5 minutes when set point =37ºC at RT=25ºC

Internal Printer

(Factory option, external

printer port is not

available when this

option is installed)

Thermal printer, Paper Width 112mm

Line Voltage Universal input: 100 - 240 VAC, 50/60Hz

Power consumption 100 VA max.

Dimensions 340(W) x 330(D) x 152(H) mm

Weight 5.5 kg

Operating Environment 5ºC to 35ºC

0 to 95% relative humidity without condensation

Storage Temperature -20ºC to 50ºC

0 to 95% relative humidity without condensation