Software Updates User guide

Data Analysis Overview

Temporarily Exclude Wells from Analysis

To exclude any wells from data analysis temporarily:

USING RIGHT-CLICK

1. Right-click the well in the well selector, on a fluorescence trace, or on a point plotted on

the standard curve. To exclude multiple wells, right-click and drag to highlight multiple

wells, traces, or points.

2. From the right-click menu, choose the appropriate option:

Well > Exclude Well

Selected Wells > Exclude from Analysis

Selected Traces > Exclude these wells from Analysis

Figure 57. Right-click to exclude a well from analysis.

NOTE: To reinclude an excluded well, click on the appropriate well in the well

selector, right-click, and select Include Well XX in Analysis.

USING THE PLATE EDITOR

1. From the Plate Setup button on the toolbar of the Data Analysis window, select View/

Edit Plate....

2. Select one or more wells in the well selector view.

3. Click Exclude Wells in Analysis (Figure 58) to exclude the selected wells. This checkbox

is at the bottom of the Plate Editor controls on the right side of the window.