Software Updates Instruction Manual

MiniOpticon Instruction Manual

Instrument Summary Toolbar

The Instrument Summary toolbar includes buttons and functions listed in Table 11.

Table 11. Toolbar buttons in the Instrument Summary window

Button Button Name Function

Set Up Experiment Set up an experiment on the selected

block by opening the Experiment Setup

window.

Stop Stop the current run on selected blocks.

Pause Pause the current run on selected blocks.

Resume Resume the run on selected blocks.

Flash Block Indicator Flash the run indicating LED on the

MiniOpticon system.

Open Lid This button is disabled for the

MiniOpticon system.

Close Lid This button is disabled for the

MiniOpticon system.

Hide Selected Blocks Hide the selected blocks in the

Instrument Summary list.

Show All Blocks Show the selected blocks in the

Instrument Summary list.

Show Select which blocks to show in the list.

Select one of the options to show all

detected blocks, all idle blocks, all the

blocks that are running with the current

user, or all running blocks.