Owner's manual
Table Of Contents
- CFX Automation System II Installation
- Using the CFX Automation System II
- Starting an Automation Run
- Adding Plates after Starting an Automation Run
- Canceling an Automation Run
- Pausing or Canceling a Single Plate Run in a CFX System
- Emptying the Waste Rack
- LIMS Information
- PrimePCR Information
- Create the Plate List: Additional Features
- Barcode Controls: Advanced Features
- Modify Settings
- Status Tab
- History Tab
- Resources
- Ordering Information
Chapter 1: CFX Automation System II Installation
| 13CFX Automation System II | 13
Calibrate the Automation System
The CFX Automation System II must be properly calibrated during installation. Recalibrate any
time the system is moved or CFX Systems are added or removed.
Default calibrations for your CFX System configuration are automatically loaded during the
system configuration step. The automation software includes a calibration wizard that aids in
making the fine adjustments required for proper calibration. To calibrate the system:
■n
Select Tools > Calibration
■n
Select the positions to calibrate
Fig. 12. Platform configuration window.
Fig. 13. Base serial number locations.
Serial number located on the
base of the instrument.
Home screen on CFX System
touch screens. Base serial number
is located on this screen.