Manual

750-0223 Filter, 365 nm.
750-0224 Filter, 405 nm.
750-0225 Filter, 436 nm.
750-0226 Filter, 546 nm.
750-0240 Conductivity Flow Cell, replacement.
750-0230 Backpressure regulator.
750-0502 Signal Import Module (SIM).
Valves
760-2008 Maximizer Proportioning Valve.
760-0406 AVR7-3 Sample Injection Valve.
760-0401 AVR7-3 Valve Rebuild Kit.
750-0471 AVR7-3 Sample Injection Port.
760-0408 AVR9-8 Stream Select Valve.
760-0403 AVR9-8 Valve Rebuild Kit.
760-0410 SVT3-2 Diverter Valve.
760-0411 SVT3-2 Valve Rebuild Kit.
750-0415 SV5-4 Select Valve.
125-0224 Inject Needle, 22-gauge blunt, fits sample injection port.
750-0251 Rack
750-0268 Rack expansion kit (two trays, two vertical bars, sixteen sleeves).
750-0260 Column clamp set.
750-0261 Rack tray; includes eight sleeves, one drain/plug.
750-0262 Vertical bar, long (2).
750-0263 Vertical bar, short (2).
750-0264 Horizontal bar kit (two tie bars, four bar clamps).
750-0265 Bar clamps (5).
750-0266 Cable Manager clips (4).
750-0269 System wrench set.
pH Monitor
760-2040 DuoFlow pH Monitor.
760-2042 pH Electrode, replacement.
760-2044 Flow Cell, replacement.
750-0502 Signal Import Module (SIM).
910-1828 O-ring, pH Flow Cell, size 2-009.
910-3014 O-ring, pH Flow Cell, size 2-018.
760-2046 BioLogic pH Monitor Tubing Kit.
Sample Injection Loops
750-0490 Small Volume Sample Loop Kit (100, 250, and 500µl loops). Nominal pressure limit of 4000 psi.
750-0491 Large Volume Sample Loop Kit (1, 2, and 5ml loops). Nominal pressure limit of 3000 psi.
750-0492 100 µl injection loop. Nominal pressure limit of 4000 psi.
750-0493 250 µl injection loop. Nominal pressure limit of 4000 psi.
750-0494 500 µl injection loop. Nominal pressure limit of 4000 psi.
750-0495 1 ml injection loop. Nominal pressure limit of 3000 psi.
750-0496 2 ml injection loop. Nominal pressure limit of 3000 psi.
750-0497 5 ml injection loop. Nominal pressure limit of 3000 psi.
750-0451 DynaLoop 25, for 25ml samples
750-0452 DynaLoop 90, for 90ml samples
ORDERING INFORMATION APPENDIX D
D-2