Software® Upgrades and Conversions Manual

Protocol Window
67
DELETING AND RENAMING CUSTOM PANELS
To delete a custom panel of analytes:
1. Select it from the Panel pulldown menu in the Select Analytes window.
2. Click the Remove Panel button . You are asked if you are sure you
want to delete the panel.
Figure 51. Delete Panel Alert
To rename a custom panel of analytes:
1. Select it from the Panel name pulldown menu.
2. Click the Rename Panel button .
3. Enter a new name in the pop-up dialog box, and click OK.
Figure 52. Rename Panel Dialog
COMBINING PANELS OF ANALYTES
To combine entire panels of analytes (for example, Human Cytokines I and
Human Cytokines II) without going to the trouble of creating custom panels:
1. Select the panels individually from the pulldown list.
2. Use the Add All>> command to move the analytes from each panel into
the Selected list.
3. Save the entire protocol as you would normally.
Your analyte selections are saved when you save the protocol.
BioPlex_6.book Page 67 Friday, September 23, 2011 11:55 AM