Software, Standard Edition

Appendix

Cable Connection Diagram

6. Exit the application and power off the array reader. Then power on

the array reader and restart the Bio-Plex Manager 4.1 software

application. The following two dialog boxes will appear in succession:

7. To restart the array reader, first exit from Bio-Plex Manager. Cycle

the power on the array reader and relaunch Bio-Plex Manager.

Congratulations—the Bio-Plex Manager 4.1 software installation is

complete!

NOTE: If the system settings were not set properly, follow the

instructions on any error message that appears. If problems are

encountered, contact your local Bio-Rad office, or in the US,

call 1-800-4BIORAD (1-800-424-6723).