Owner's manual

When using a buffer as mobile phase,
rinse the holder’s end fittings with water
after removing the cartridge. This will
prevent salt precipitation which would
scratch or damage the seals.
Specifications
Materials in contact with the mobile
phase are 316 stainless steel and Kel-F
®
fluorocarbon.
Ordering Information
Catalog
Number Product Description
125-0131 Standard Cartridge Holder
125-0139 Deashing Holder
125-0028 1/16” Reverse Nuts with Ferrules, Parker
type (2 each)
125-0046 1/16” Reverse Nuts with Ferrules, Valco
type (2 each)
125-0027 HPLC Connector, 1/16” LDV Reverse Nut
Union (1)
125-0040 Stainless Steel Tubing, 1/16” x .010” ID x 3”
length, pkg. 5
125-0041 Stainless Steel Tubing, 1/16” x 0.10” ID x 6”
length, pkg. 5
125-0147 Seal Replacement Kit
125-0148 Replacement Seals
Kel-F is a registered trademark of the 3M Company.
4
M1250131B 11/28/2000 3:16 PM Page 6