Instruction manual

40
Imager Specifications
APPENDIX B. IMAGER SPECIFICATIONS
Imaging Type: Fluorescence, Transmittance
Detector Type: CCD array, 753 x 244 pixels
Light Source: UV lamp filtered for maximum output at 368 nm
Imaging Resolution: Vertical resolution of 320 µm
Excitation: Wavelength maximum output at 368 nm
Imaging Area: 10 x 10 cm cassette holder, 8 x 8 cm imaging area
Imager Dimensions: 12.25 (H) x 7 (W) x 12 (D) inches
Interface: ISA PC card (included)
File Formats: Exports TIFF, WMF, BMP, PCX, GIF, and PICT file formats
Reports Formats: Image, band data, densitometer, and integrated reports
Minimum Computer & Computer: IBM
®
-compatible 386 25 MHz computer; 256 gray scale or
Display Requirements 256 color video output
Display: 800 x 600 pixel resolution
Power requirements
(switch selectable)
120 volt setting: 100-120 V, 50/60 Hz; Fuse*: 250 mA, Time Delay
240 volt setting: 220-240 V, 50/60 Hz; Fuse*: 160 mA, Time Delay
*Note: User must ensure correct fuse is in place for selected voltage set-
ting.
Environmental
Operating Temperature: 4° to 40° C
Humidity: 0 to 95%, in the absence of condensation