Instruction manual
7
Installation and Startup
1.3 VERIFY SYSTEM OPERATION
This section provides a general description of the use of the Glyco Doc system.
1.3.1 Starting the Glyco Doc Software
When you power-up the computer, monitor, and Imager, a series of self-test and configuration status mes-
sages is displayed, followed by the C:\>, which is the indication that the system is ready.
Start the Windows 3.1 interface software (by typing win), and then double click on the Glyco Doc icon to
launch the Glyco Doc application. (Refer to the MS Windows User’s Guide for complete information on the
use of MS-Windows 3.1.)
Figure 5. Glyco Doc Icon
Glyco Doc
Glyco Doc
Carbohydrate
Analysis