Instruction manual

Table 17. (continued)
Program Mode’s Fraction Collector Table
Reference Description
Fraction Collection Summary: This screen shows the current
collection mode and an estimate of the number of fractions
which will be collected when the method is run. The estimate is
accurate when threshold collection is not used and no manual
overrides are performed during the run. This estimate will be
incorrect if manual overrides are performed during the run or
when a threshold is used. In either case the actual number of
fractions collected can be either more or less than the estimate.
• Edit: Allows the fraction collection parameters to be viewed
and changed.
• Erase: Removes the existing fraction collection program-
ming from the method. No fraction will occur when the
method is run.
• New Mode: Allows the collection mode to be changed by
displaying the Select Collection Mode screen.
• OK: Returns to the Method List
63
System Operation
Method: Volume: 1.00 ml
FC Mode: Collect All
Estimated Number of Fractions: 20
EDIT ERASE NEW MODE OK
F1a
F2
F3
F4
F5
Figure 25. Programming: the Fraction Collector Table’s Summary
(Screen displays are keyed to the discussion in Table 17)
Method: name Volume: 1.00 ml
Select a Fraction Collector Mode
ALL THRESHOLD WINDOWS THRES+WIN
F1 F1a
SEE SECTIONS
5.3.5.1 - 5.3.5.4
Allows you to
change the
collection parameters.
See Sections 5.3.5.1 -5.3.5.4
To change
collection mode.
To remove Method's
fraction collection
mode; no fraction
collection will occur
when the Method is run.
F1 SELECT COLLECTION MODE
F1a FRACTION COLLECTION SUMMARY
FOR FRACTION COLLECTION MODES
LEGEND: SELECT COLLECTION MODE
Method: name Volume: 2.00 ml
FC Mode: Collect all
Estimated Number of Fractions: 20
EDIT ERASE NEW MODE OK