Instruction manual

Table 15. (continued

Program Mode Operation: Viewing and Editing a Method

Reference Description

Save As... screen: This screen provides a number of options.

• Replace: This replaces the previous version of a method

with the newly modified method. In this case the previous

version is permanently lost.

• New Name: This allows the modified method to be saved

using a new name. In this case both the original method

and the modified method with a different name are saved.

• No Save: This allows the method to remain the current

method and for it to be run without saving it in permanent

storage. This option is typically used when a method will

never be repeated or when 50 methods are already stored

in permanent memory. Methods which are not saved will

always be named “<untitled>”.

Note: The “<untitled>” method loaded as the current

method is not lost when the power is shut off and remains

the current method when power is restored.

• Cancel: This gives the option to abandon the changes or

additions to the original method and revert to the method as

it was before. There will be a confirmation screen with a

Yes/No choice to prevent accidental loss of the modified

method if this key is pressed unintentionally.

System Operation

Method: name Time: 2.00 min

Replace existing method with this name,

use a new name, or use without saving?

REPLACE NEW NAME NO SAVE CANCEL

(refer to

section 5.3.7)