Owner Manual

6
Maintenance & Cleaning
Screen Filter Cleaning
Close the water valve.
Exterior surface of unit is made of plastic
material, which may be damaged by scrubber,
chemicals, etc.
Remove the power plug from the outlet.
Close the water feed valve.
Press the lever plate and gently pull to remove
the unit from the catch plate.
Use a coin to open the drain plug.
Wipe the surface with a soft damp cloth.
Do not spray water directly onto the surface.
Be careful of not dropping any chemical detergents
of toilet cleaner on the water supply hose.
Risk of the hose damage.
Clean the body after removing the power plug
from the outlet. Be sure no water splashes into
the power plug or outlet.
Disconnect the water supply hose. Take the
screen filter out and clean it with a soft brush.
Return the filter after cleaning and reconnect
the water supply hose.
Open the water valve.
Cleaning of Unit Body Draining of Remaining Water
OR
Water supply hose
Screen filter
When bidet seat is not used for an extended period
of time, unplug and drain the unit.
Maintenance during Winter Season
7
Settings
Silent mode
“ ” for longer than
3 seconds.
Power off
To turn on/off the operating
chime sound.
ON
ON
OFF
Press one of Stop, Wash, Bidet,
Intensive or Dry to power on.
Seat sensor feature will be
deactivated.
To turn on/off the night light.
* The unit will work without sitting on the seat if the occupied seat sensor is deactivated. (turned off)
* If the seat sensor is deactivated, some features cannot be controlled.
(Night light on/off, silent mode on/off, and nozzle cleaning)
“ ” for longer than
3 seconds.
“ ” for longer than
3 seconds.
“ ” for longer than
3 seconds.
Seat sensor
bypass
Night light
: Seat sensor ‘on’ : Seat sensor ‘off’
: Regardless of on/off
No Function Switch operation Description
Initial
status
Seat
status
Massage
Factory reset
Press and hold the Stop
button for 5 seconds.
After 3 seconds, the seat will power
off. Keep holding another
2 seconds and the seat will power
back on. This completes the factory
reset process.
ON
No Function Switch operation Description
Initial
status
Seat
status
Thank you for purchasing this seat.
This unit should be installed according to this manual.
Read this manual carefully and install properly.
Do not attempt to service this unit yourself. Doing so could void warranty.
7-1. User setting with the remote control
7-2. User setting with the side control (auxiliary panel)