Owner Manual

10 11
5. Attach the water supply
hose that comes from
the water shut off to the
bottom of the T-Valve.
6. Connect the metal
hose we supplied
to the open side of
the T-Valve.
7. Insert the rubber non-slip
mats to the bottom of
the bidet.
8. Place the circular
mounting brackets into
the bidet attachment.
9. Place the bidet on
the toilet with the
mounting brackets
over the bolt holes
and make any needed
adjustments to make
sure the bidet is
centered on the toilet.
10. Place the toilet seat
back on the toilet over
the bidet and secure
the bolts down so that
the seat and bidet
attachment are stable.
11. Connect the hose
from step 6 to the bidet
water connection
underneath the handle
of the Essential.
12. Slowly turn the
water supply valve
back on, check for
leaks, and test the
unit for functionality.
INSTALLATION (CONT.)