Operating Guide

Installation Manual and Operating Instructions
16 17
5 Operation (Details)
NOZZLE CLEANING (Automatically)
󰢠This product has an automatic nozzle self-cleaning function that
cleans the nozzle before and after each use.
Auto Wash
- If the “MASSAGE” ( , ) function selected when user is not using wash functions,
it automatically operates wash and dry function sequentially.
- Wash (30 Seconds) + Dryer (1minute) then automatically stops
NOZZLE CLEANING (Manual)
󰢠Nozzle can be cleaned manually by pressing “Posterior Wash”( / ) button for 3 seconds
without being occupied on the seat and nozzle will come out without spraying water. After cleaning
the nozzle, Press “Stop”( / ) button to return nozzle to stand-by mode.
( , : in Simple Operation panel -Remote Model)
Nozzle Shower
- If the “MOVE” ( , ) button is selected without sitting on the seat,
it operates nozzle shower function.
- Water flows automatically to nozzle and nozzle moves for about 20 seconds
to wash entire nozzle and then it automatically retracts.
󰢠When using the Posterior Wash or Feminine Wash functions, pressing the “MASSAGE” ( , )
button will provide a pulsation spray.
󰢠You may change the pressure of the spray by pressing the “High”( ) button or “Low”( ) buttons.
󰢠Push the “MASSAGE”( , ) button again and the pulsating action will stop automatically.
Auto-Setting of Massage Feature
󰢠You can set this function to automatically pulsate whenever the seat is occupied and the Posterior
or Feminine washes are in operation.
Step 1: Sit on this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on this product and proceed with Posterior or Feminine Wash.
Note: In the automatic setting, you may still adjust the pressure of the pulsating spray by
pressing the “high”( ) or “low”( ) functions.
Canceling the Automatic Oscillation function
Step 1: Sit on this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a double Chime.
MASSAGE (Rhythm Wash) ECONOMY (Energy Save Mode)
- Keep seat cover closed when not in use to prevent heat from being lost.
- Keep temperature set to low.
- Unplug the power cord if you do not plan to use the unit for a long period of time.
Saver On/ Off
- When pressing( , ) the energy saver LED on the main unit will turn on.
(press button again, the saver LED will turn off)
- Energy saver mode automatically maintains a water and
seat temperature of 89.6(32).
- When using bidet in saver mode, it is turned to automatic saver.
- When you rise from the seat, it goes into saver mode.
- Seat temperature is maintained 32.
Other energy saver tips
In order to save energy, please abide by the following instructions:
In energy saver mode, the seat heating temperature could appear to be
lower than the actual temperature setting.
OFF
State
ON
State
Flashing
State
OPERATION
OCCUPIED
SENSOR
ENERGY
SAVER
POWER
BB-2000
DEODORANT ENERGY
SAVER
POWER
BB-1700