User Manual

6
INSTALLING THE SlimEdge(cont.)
2.Close the water supply valve and flush the toilet
completely so that there is little to no water left in
the toilet tank.
3.Disconnect the water hose from underneath the
toilet tank.
4.Connect the 7/8”T-valve to the toilet fill valve
where you just removed the water hose from.
a.Make sure the rubber washer is properly
seated and the narrow side is up.
5.Attach the water supply hose that comes from
the water shut off to the bottom of the T-Valve.
Step 2
Step 3
Step 4
Step 5