User Manual

5
PREINSTALLATION
Step 1
INSTALLING THE SlimEdge
1.Remove the existing toilet seat by locating the
bolts and nuts,typically under a plastic cover,
and removing them first.
Check Water Supply Line
Inspect your current water supply line that connects to the toilet
tank fill valve to ensure it is a flexible water supply hose. If it is a rigid
pipe ,you will need to purchase a flexible water supply hose before
installing the SlimEdge. The hose needs to be 7/8”(to connect to the
T-valve we provided) on one end and either 3/8” or ½”,depending
on your wall valve, on the other end.
Please be advised that the provided T-Valve
should be installed at the fill valve under the
toilet tank,NOT down at the water supply
coming from the wall.
If you do not have access to the fill valve under
the toilet tank,contact Biobidet Customer Service
at 847.458.2334 and we may be able to provide
alternative fittings.